MacKenzie Gas Blender | Quality Beverage

The MacKenzie gas blenders are highly accurate, cost-effective, and reliable, designed to mix gases (like C𝑂2/Nitrogen) on-site for beverage dispensing and industrial applications. Key benefits include significant savings on gas costs by eliminating pre-mixed cylinders, improved product quality (preventing foamy beer), reduced storage space, enhanced safety, and no electricity requirement.

Installation Instructions

The MacKenzie Double Gas Blenders mix CO2 and N2 on demand and are best used for long draw draft systems. The panel mounts easily on the wall, and is simple to install.

Features:

Easy installation.
No electrical set-up required.
5 Year Limited Warranty
Outlet 1: 60% CO2 or 70% CO2
Outlet 2: 25% CO2 (Custom Blends available upon request. Call us with your special request).
Does not operate if either supply gas fails or becomes empty.

Specifications:

Connections: Two Inlet Gas Lines (CO2 & N2), Mixed Gas Outlet Line. (per blend)
Fittings: Panel comes with standard 1/4" female NPT fittings.
3/8" barb fittings inlets/outlets
Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
Standard Flow Capacity:
- At 55 psi minimum inlet pressure, up to 12 kegs/hour.
Inlet Pressures: Factory preset pressure 50 psi, but can be customized for your system. Please contact us with your order if you would like to request a custom inlet pressure, maximum 150 psi.
Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.

Installation Instructions

The MacKenzie Single Gas Blenders mix CO2 and N2 on demand and are best used for long draw draft systems. The panel mounts easily on the wall, and is simple to install.

Features:

Easy installation.
No electrical set-up required.
5 Year Limited Warranty
Outlet 1: 60% CO2 or 70% CO2 (Custom Blends available upon request. Call us with your special request).
Does not operate if either supply gas fails or becomes empty.

Specifications:

Connections: Two Inlet Gas Lines (CO2 & N2), Mixed Gas Outlet Line. (per blend)
Fittings: Panel comes with standard 1/4" female NPT fittings.
3/8" barb fittings inlets/outlets
Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
Standard Flow Capacity:
- At 55 psi minimum inlet pressure, up to 12 kegs/hour.
Inlet Pressures: Factory preset pressure 50 psi, but can be customized for your system. Please contact us with your order if you would like to request a custom inlet pressure, maximum 150 psi.
Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.

The McDantim In-Line Leak Indicator can tell you in seconds if you have leaks in your beer system and how big those leaks are no matter what gas source you use or how complicated your system is. A small leak of one-half cubic foot an hour wastes more gas each day than you would use to dispense two kegs of beer. One glance before you pour your first beer or after pouring your last beer assures you that you have no problem or that you need to call a service person. As you repair leaks, it serves as your scorecard, letting you know how much of the problem is resolved and if all leaks are fixed. Our In-Line Leak Indicators are especially valuable in systems with Nitrogen generators. Leaks in these systems not only waste gas and electricity but also kill off compressors. Rebuilding or replacing compressors is expensive and troublesome.